K1200R Clutch Cover

[GDS968]

I need a new clutch cover amongst other things due to crashing at a recent track day!!

I have an option to get a K1300R cover at a reduced cost instead of the K1200R cover I should have! They both use the same gasket but I have been told by a spares supplying that they are different. Can anyone confirm if they are different etc

cheers

Gary

[JoeBoxerKR]

Yes they are different
The parts number are different
I believe the mount for the slave cylinder is different

[Bernardo]

Hi Gary

as G said are different, basically due the slave cylinder

K12=32mm diam. http://www.realoem.com/bmw/showparts.do ... 52&lang=en
and
K13=34mm diam. http://www.realoem.com/bmw/showparts.do ... 52&lang=en

[GDS968]

Thanks Bernado

[BmrTech]

If you want a "lighter" clutch pull, the 1300 cover and slave cylinder are compatible with the 1200 engine and clutch.

[GDS968]

Thanks BrmTech for the advice, I have managed to get a later cover from a K1300 and fitted a K1200 slave unit.