Just wanted to confirm for everyone that the following LED's do work with the K1300s, fit well, and do not cause any can bus issues.
They can be purchased here: http://www.superbrightleds.com
(do a search for "can bus" or with the part numbers below)WLED-x5-CBT
: 5 Radially Mounted High Power SMD LEDs, 1 Forward Aiming SMD LED, CAN Bus bulb - 360 degree beam - These bulbs are Non-Polarized (I used Natural White LED for headlight area W5W replacement and license plate light replacement)WLED-x13-CBT
: 13 Radially Mounted High Power SMD LEDs, 1 Forward Aiming SMD LED, CAN Bus bulb - 360 degree beam - These bulbs are Non-Polarized (I used amber for front turn signal replacement (remember with LED to match light housing color))
The replacement LED size is the same as OEM so there are no fitment issues to concern yourself with. They are very close to OEM brightness, maybe even a smidge brighter.
I use Weiser LED replacement kit for the rear turn signals and, ignoring the headlights, am now 100% LED, I have no can-bus issues, have not had to modify anything and the flash rate remains the standard rate and is not accelerated with this setup.